海洋光学--微型光纤光谱仪的发明者
海洋光学--微型光纤光谱仪的发明者
光纤光谱仪  

光纤光谱仪

光纤光谱仪 光纤光谱仪 光纤光谱仪 光纤光谱仪 光纤光谱仪 光纤光谱仪 光纤光谱仪 光纤光谱仪 光纤光谱仪
光纤光谱仪

sina weibo Our YouTube Channel 光纤光谱仪

海洋光学--微型光纤光谱仪的发明者
应用系统
光纤光谱仪
光学传感器
光谱软件
光学采样附件
光源
光纤
探头
光学元件
镀膜
教育
OEM解决方案
优惠活动
 

 

SpecVetteTM Cuvettes

SpecVettes are UV-transparent, short pathlength, disposable cuvettes especially designed for use with the HR4000 and HR2000+ High-resolution Spectrometers. Economical and disposable, SpecVettes eliminate cross-contamination and reduce analyte consumption.

SpecVettes are available in pathlengths of 250, 500, and 1000 microns and only require a few microliters of sample solution, eliminating the many challenges associated with measuring highly concentrated samples using traditional, short-path cuvettes. A special universal adapter makes SpecVettes useable with our CUV-ALL-UV cuvette holder. Other features include UV transparency to 220 nm, and an easy-to-fill pipette tip port, and optional valves and electrodes.

About SpecVettes

The design of the SpecVettes simplifies the measurement of UV-absorbing compounds such as tannins and phenols, which normally require dilution to use a standard 1 cm pathlength cuvette. SpecVettes are flat, rectangular cells with a simple inlet port that allows a 20-200 ?/font>L pipetter to fill the sample window either by dispensing or allowing the sample to be drawn into the sample chamber by capillary action. The SpecVette then slides into a 1 cm by 1 cm sample holder such as the CUV-ALL-UV. Each SpecVette contains two sample windows, making to possible to have a match sample and a blank on a single device.

SpecVettes are sold in packs of 25, with or without the universal adapter. Two-piece sample packs are also available.

SpecVettes are a product of ALine, Inc., which specializes in small-volume disposables for lab analysis.

Universal Adapter

A universal adapter is available to allow SpecVettes to be used with any spectrometer with a z-height of 12 to 20 mm. SpecVettes are compatible with the Ocean Optics HR4000 and HR2000+ Spectrometers when used with the universal adapter in the CUV-ALL-UV cuvette holder.

 

Benefits

  • Easy to use, no risk of breakage

  • Fast throughput, does not require washing/cleaning between samples

  • High accuracy and reliability

  • Cost-effective and disposable

  • Customizable to meet specific requirements

  • Flat form factor makes viewing by microscope possible for transmission

  • Capillary fill eliminates trapped air bubbles

Ordering Information

Item Code Description Price
CSV-6-SP 6-piece sample pack with adapter, 2 each:  250 ?span style="font-family: Arial; font-size: 10pt">m pathlength, 500 ?span style="font-family: Arial; font-size: 10pt">m pathlength, & 500 ?span style="font-family: Arial; font-size: 10pt">m pathlength $44.50
CSV250-25 25-pack, 250 ?/font>m pathlength $89
CSV250-25-A 25-pack with adapter, 250 ?span style="font-family: Arial; font-size: 10pt">m pathlength $129
CSV500-25 25-pack, 500 ?/font>m pathlength $99
CSV500-25-A 25-pack with adapter, 500 ?span style="font-family: Arial; font-size: 10pt">m pathlength $139
CSV1000-25 25-pack, 1000 ?/font>m pathlength $119 
CSV1000-25-A 25-pack with adapter, 1000 ?span style="font-family: Arial; font-size: 10pt">m pathlength $159

Measurement Data

The following graphs show that SpecVettes and the adapter can be used with an Ocean Optics spectrometer (in this case, an HR4000) for precise determination of strong UV-absorbing components in samples such as red wine. A DH-2000-BAL light source was also used, along with the SpecVettes (500 ?/font>m pathlength) and the universal adapter.

In Figure 2, 10 different cuvettes with the same wine sample were compared against a single water blank. In Figure 3, a series of 10 repeat measurements were taken with the same wine sample using the same water blank.

Specifications

Volume

Dead volume: 2 L
Dead volume (tubing interface): Depends on length of tubing at inlet side of SpecVette; typical ID is 0.030", OD is 0.063" (1/16"); length of tubing is 1.5" on each side
Contained volume: Depends on pathlength
Materials
UV-transparent Film: 50 mm (0.002") (UV-transparent to 220 nm)
Acrylic/polyester: 0.75 mm (0.030")
Bonding: Medical-grade acrylic solvent for bonding Delrin to the UV-transparent film
Connectors
For Pipette Interface: Acrylic
For Hose-barbed Interface: Polysulfone
For tube connection: Translucent FEP for tubing; glue is a solvent-less UV-curing medical-grade adhesive

 

海洋光学 - 微型光纤光谱仪

 

 


Contact an
Ocean Optics 
Applications Scientist

View a short video at ALine's website

Use our CUV-ALL 4-way Cuvette Holder