 The new NeoFox
Phase Measurement system is a
fluorescence-based optical
sensor system that helps you
reduce costs, improve stability
and make calibration easier for
a wide variety of oxygen sensing
setups. NeoFox is the benchtop
device for measurement of
fluorescence lifetime, phase and
intensity and is particularly
suited for applications where
sensitivity to drift and system
stability are critical.
Plus, NeoFox is
about half the cost of
comparable phase measurement
systems.
 Plus, NeoFox is
now available in a new Sport
version. NeoFox Sport is the
portable, handheld, system that
includes the NeoFox phase
measurement system with LED
light source, rechargeable
battery pack and low-power
display. NeoFox Sport starts at
a modest $3,199.
NEW! Check
out the
FoxyKit sensing kits for
probe and patch applications.
*Please
contact an Applications
Scientist before specifying
FOSPOR or other coatings.
|
Probe Specifications: |
|
|
FOXY
Formulation |
FOSPOR Formulation |
HIOXY
Formulation |
| |
(general-purpose
coating) |
(high-sensitivity for
low levels of O2) |
(for
hydrocarbon
environments) |
|
O2%
range (at 1 ATM): |
0-100% |
0-10% |
0-20.9% |
|
DO
range (ppm at 1 ATM): |
0-40 ppm |
0-4 ppm |
0-8 ppm |
|
Temperature range: |
-50-+80 C for probes |
-50-+80 C for probes |
-50-+60
C |
|
0-60
C for patches |
0-60
C for patches |
NA |
|
O2%
resolution: |
0.01-0.05% |
.001% |
0.01-0.05% |
|
DO
resolution (at room
temp): |
4-20
ppb |
0.4-2
ppb |
4-20
ppb |
|
O2%
accuracy: |
5% of
reading |
5% of
reading |
5% of
reading |
|
DO
accuracy: |
5% of
reading |
5% of
reading |
5% of
reading |
|
Min.
detectable level in gas: |
0.01% - 0.05% |
0.001% - 0.01% |
0.01% - 0.05% |
|
Response time: |
< 1
second in gas |
< 1
second in gas |
< 1
second in gas |
|
~30
seconds with overcoating
in gas |
~30
seconds with overcoating
in gas |
~45
seconds in pure water |
|
|
~45
seconds in pure water |
~45
seconds in pure water |
|
|
Patch Specifications: |
|
|
FOXY Formulation |
FOSPOR Formulation |
HIOXY Formulation |
|
02% range (at 1 ATM): |
0-100% |
0-20.9% |
0-100% |
|
DO range (ppm at 1 ATM): |
0-40 ppm |
0-8 ppm |
0-40 ppm |
|
Temperature range: |
-20 to +60 C for
patches |
-20 to +60 C for
patches |
-20 to +60 C for
patches |
|
02% resolution (20 sex
averaging): |
0.05% |
0.01% |
0.05% |
|
DO resolution (at room
temp): |
20 ppb |
4 ppb |
20 ppb |
|
02% accuracy: |
5% of reading |
5% of reading |
5% of reading |
|
DO accuracy: |
5% of reading |
5% of reading |
5% of reading |
|
Min. detectable level: |
0.1% O2 |
0.01% O2 |
0.1% O2 |
|
Min detectable level in
water (at room temp): |
40 ppb |
4 ppb |
40 ppb |
|
Response time: |
<1 second in gas |
<1 second in gas |
<1 second in gas |
|
|
~30 seconds with
overcoating in gas |
~30 seconds with
overcoating in gas |
|
|
|
~45 seconds in pure
water |
~45 seconds in pure
water |
~45 seconds in pure
water |
|
Sterilization Guide: |
|
|
FOXY Formulation |
FOSPOR Formulation |
HIOXY Formulation |
|
Form factor: |
Probes/Patches |
Probes/Patches |
Probes |
|
Autoclavable: |
No |
Not yet determined |
Yes |
|
Calibration: |
|
|
Single point reset
required after
sterilization |
|
Gamma: |
Yes |
Not yet determined |
Yes |
|
Misc: |
|
|
|
 |
